一个人看的日本www,一本一道中文字幕无码东京热,国产成人免费手机在线观看视频,天天综合网天天做天天受

 

Water based atomic ash is a green environmental protection material for building decoration. Formaldehyde, toluene, lead and other cancer treatment and toxic substances Jue do not contain. Instead of the traditional oily putty for construction, it is a new environmentally friendly primer product.

 

 

 

Characteristics of aqueous atomic ash products

 

Water based atomic ash is environmentally friendly, solid, waterproof, moisture-proof, smooth batch scraping, simple construction, fast drying, easy polishing, strong adhesion and high hardness. It can more effectively improve the paint surface effect. Its comprehensive performance is much better than ordinary atomic ash and pig blood ash. It has the characteristics of good burnability and saving paint and other auxiliary materials. During the atomic ash period of 5kg / barrel, the product can be scraped twice on the material of about 80 square meters, polished and dedusted, and sprayed with finish paint after it is dry, with good effect. In the application field of water-based atomic ash, it is used as priming material for interior decoration wood paint such as white paint and solid color paint. It can also be used for ceiling, indoor wall batch swing, etc. it can solve the phenomena of blistering, cracking and shelling of paint surface caused by insufficient hard bottom tension and bonding of underlying material or moisture of wood. Fill and decorate defects such as pits, pinholes, cracks and small welds on the substrate to meet the flatness and smoothness of the substrate surface before the finish paint. It is widely used in train manufacturing, ship manufacturing, bus manufacturing, engineering machinery manufacturing, machine tool machinery and equipment manufacturing, automobile repair, furniture, molds, concrete buildings and various metal products, wood products, FRP products that need to be filled and repaired.

 

 

 

Introduction to the use of aqueous atomic ash

 

1. Select or prepare putty of corresponding color, and directly fill the putty in cracks, holes, nail holes and marks with putty knife. Deep holes can be filled in layers and dried layer by layer.

 

2. For wood eye leveling, finishing and primer coating, 1kg water-based atomic ash can be mixed with about 300-400ml water to the required consistency, and coated on the surface with putty knife, cloth, brush or roller. If the putty is too hard, heat water or a small amount of cold water to the required concentration.

 

3. When the hole filler is completely dry, polish it with 180-240 mesh sandpaper. The polished putty can be recycled, and the tools or hands can be cleaned with water.

 

4. The water-based atomic ash has strong heat resistance. After construction, it can be dried by infrared, heating lamp or placed in the drying room to shorten the drying time. Of course, it can also be dried naturally.

 

 

 

Construction reference and precautions of waterborne atomic ash

 

The construction surface must be cleaned. If the product is too thick, it can be mixed with a small amount of water before construction. Remember to add its ingredients by mistake. The remaining products can be covered tightly and stored in a cool and dry place where children can't easily get them. They can be used again when needed next time. There are many application fields of water-based atomic ash, and there are many details to pay attention to in the process of use. The above contents are introduced in detail by the atomic ash manufacturer, which can be used for reference in the process of use in the future. I hope that after reading the above contents, you can have an understanding and understanding of aqueous atomic ash.